![]() I am able to open it up if needed, I already have but not much inside (was hopeing for a re-set button) Yea I'm a nube, but I think I got close, but no dice. ![]() So my question here, am I screwed? I have already committed to purchasing another one of these as they are fun, even without the camera, but I would like to try and get this one back. I tried removing power for 30 minuets and powering up, nothing. I then lost the wifi connection and now nothing. Now for the oops, It was complaining about ActiveX and I thought I was adjusting those settings, but I received a message that the camera was re-setting and not to power-down, so I didn't. I was able to see the video but had a 1 second refresh rate, not streaming. Great! I found I could connect to the camera with the laptop via (192.168.1.1) and get in with a login of "admin". I got to looking on the internet about connecting a go-pro camera to a laptop and capturing video to VLC player. So every time I wanted to "play" I had to enlist one f them, and they don't want to come out in the cold. Only my Wife and Daughter have these devices, I only have a laptop. We had fun with it, but the problem I have is it requires a smart phone or tablet to download the app and capture videos. I purchased a "Sky Viper Video Streaming drone" (around $100 US) so not a real loss. Need some help with a camera wifi connection « on: January 19, 2016, 12:26:01 PM » Hello all, I am coming here as I really messed up and Dave said that this is the best place to find help. So my question is, can I reset the wifi module attached to the camera somehow physically? Is there some sort of reset pin that I can short or something to reset it to defaults? I've researched the wifi chip and here is the datasheet Any help would be greatly appreciated guys. This would no be a big deal, aside from the fact that I can no longer view the video stream from the camera, just a blank grey screen. Naturally, I changed the username and password, and upon trying to log back in, it will not accept my changed credentials either due to a typing mishap on my part, or some other reason. There was a pretty basic settings page and it notified me that my username/password were weak (the default was username: admin with no password) and needed to be updated. On a whim, I decided to see if i could access the configuration page for the wifi access point. The camera module creates its own wifi "hotspot" which you connect to with your device and use the app to view/record the video/pictures. I have a cheap drone, model in the title, that streams video to your phone via a wifi connection. Capture Amazing Aerial Pictures & Videos and perfect your piloting skills with the Sky Viper SE Video Viewer app FEATURES Stream live video to your smart. If this boot process goes well, firmware file should be erased.Ok, I've googled all over the place, and the only mention I found anywhere close to what I'm after was on this forum. Connect battery while the other end of wire touching the pad.Copy FIRMWARE_660R_F.bin to the root of SD card.Temporarily solder thin wire to SD card slot metal part (GND).Sonix board bootloader pad is marked as TP4 next to Sonix chip. Rebooting with Sonix board bootloader pin pulled down will cause the Sonix board load firmware from SD card. ![]() Place a copy of FIRMWARE_660R_F.bin in the root directory of the SD card. In the rare event you may need to recover Sonix board using the SD card at the boot time. Rebooting will cause the Sonix board to flash the Flight Controller before the STM32 leaves the bootloader. Place a copy of arducopter.abin in the root directory of the SD card - but change its name to flight_fw.abin If the Flight Controller becomes un-flashable at runtime, recovery is possible using the SD card at boot time. Summary: Flight Controller Recovery using the SD card ![]() I’ve only used this to recover the flight controller firmware, not the Sonix board.įirmware can be found at: (someone should archive this site just in case) You can reset the flight controller firmware by placing it on the root of a formatted SD Card as outlined here: Does a little orange light flicker inside the body when you first power it up?ĭo the red and green external LEDs flash? Hold it close to your face and look near the camera. Do any of the lights flash when you power it on? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |